manualshive.com logo in svg

Sony VAIO PCG-QR10, User Manual

Share
Download
Sony VAIO PCG-QR10 User Manual Download Page 58

Sony Not

e

book Us

er

 G

u

id

e

Getting help

58

n

N

The disk may be scratched. Place another disk to see if that is the reason.

There may be condensation in the drive. Remove the disk and leave the drive open for approximately 
one hour.

About sound

My speakers are not producing sound

The built-in speakers may be turned off. Press 

<Fn>+<F3>

 to turn on the speakers.

The speaker volume may be turned to the minimum. Press 

<Fn>+<F4>

, and then press 

 

or 

 

to increase 

the volume.

If your computer is powered by battery, check that the battery is inserted properly and that it is charged.

If you are using an application that has its own volume control, check that the volume is turned up.

Check the volume controls in Windows

®

.

If you use external speakers, check that the speakers are properly connected and the volume is turned 
up. If the speakers have a mute button, make sure it is off. If batteries power the speakers, check that 
the batteries are inserted properly and that they are charged.

If you have connected an audio cable to the Headphone connector, disconnect the cable.

My microphone does not work

If you are using an external microphone, check that the microphone is plugged into the microphone 
connector.

Summary of Contents for VAIO PCG-QR10

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands