6.
Type a name in the
Profile Name
box.
7.
In the
Transmission Rate
box, make sure
Fully Auto
is selected. By selecting
Fully Auto
, your computer
automatically searches for the strongest (radio) signal.
8.
In the
ESSID
box, type the name of the access point or click
Scan
to select an access point.
9.
Select a
Power Save
option.
10.
In the
Network Type
box, select
Infrastructure
to connect to or set up a network to access point (host)
connection or click
Ad Hoc
to connect to or set up a computer-to-computer connection.
11.
If the network was not set up with an encryption key, click
Apply
.
12.
If the network was set up with an encryption key:
1.
In the
WEP Key
box, select
40bit/64 bit
for IEEE 802.11b access points.
2.
In the
Key format
box, select either
ASCII mode
or
HEX mode
, depending on the encryption key.
3.
In the
Default Key
box, select the correct encryption key.
4.
Type the key name in the appropriate key box.
5.
Click
Apply
.
To disconnect from a wireless network
Move the Wireless LAN switch to
OFF
. The Wireless LAN indicator turns off.
Page 111
