manualshive.com logo in svg

Sony VAIO PCG-F610, User Manual

Share
Download
Sony VAIO PCG-F610 User Manual Download Page 27

 Notebook User Guide

12

Using Battery Power

You can use a battery pack as a source of power.For more information on 
conserving battery life, see “Using Power Saving Modes” on page 32.

The battery pack that comes with your computer is not fully charged at the 
time of purchase. Follow the steps below to insert and charge the battery 
pack.

To insert the battery pack

1.

Open the cover of the battery bay.

2.

Insert the battery pack into the battery bay on the left side of the 
computer.

3.

Close the cover of the battery bay until it clicks.

To charge the battery pack

1.

Connect the AC adapter to the computer. 

2.

Insert the battery pack.

When attaching your computer to the port replicator, do not attempt to insert or 
remove the battery pack. Lifting and turning the computer with a port replicator 
attached could cause a temporary loss of power.

Battery pack
(supplied)

Label side facing down

Summary of Contents for VAIO PCG-F610








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands