Using Power Saving Modes
65
To activate System Hibernation mode
To activate System Hibernation mode, press the key combination Fn+F12.
To return to normal mode
Turn on the computer by sliding the power switch forward. The computer returns
to its previous state.
❑
Time to return to normal mode:
System Idle requires less time than System Suspend, and System Suspend
requires less time than System Hibernation.
❑
Power consumption:
System Idle uses more power than System Suspend, and System Suspend
uses more power than System Hibernation.
Notes on Power Management
Using Power Management
❑
If you find that an application exhibits unexpected behavior (such as reduced
video quality) after returning from a power saving mode, you should close
that application before your computer enters a power saving mode.
❑
For maximum audio and video performance, use PowerPanel to select either
the AC Power Profile or the Power Management Off profile.
❑
If your battery level falls to less than 10 percent, you should either attach the
AC adapter to recharge the battery or shut down your computer and insert a
fully charged battery.
✍
(Windows 2000 Professional) the Save to Disk Manager message appears, and then
the computer enters System Hibernation mode.
✍
Do not move the notebook until its power indicator light turns off.
✍
When returning from System Hibernation mode, the system status stored on the hard
disk is erased and the computer starts normally if you slide the power switch forward
and hold for more than four seconds.
