A
d
jus
tment
Making Various Settings
62
Adjusting the Brightness of the
Printer Window Display
When it is hard to read the contents of the printer
window display, adjust the brightness using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the LCD-CNTR. item, then adjust the
brightness of the printer window display.
Selecting Whether the Operation
and Error Tones Sound
Whenever you press a button on the front door, the
operation tone sounds (one time). When an error occurs,
the alarm tone sounds (three times). You can turn these
tones on and off using the menu.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the BEEP item, then select whether or not the
operation and error tones sound by pressing the
G
or
g
button.
Setting the Baud Rate
When controlling the printer with a computer connected
to the printer’s RS-232C connector, select the
appropriate baud rate. For details, contact your nearest
Sony dealer.
1
Display the SYSTEM SETUP menu from the
PRINTER SETUP menu.
2
Select the BAUDRATE item, then select the desired
baud rate by pressing the
G
or
g
button.
Displaying the Remaining Amount
of the Ink Ribbon
You can always display the remaining amount on the
video monitor.
Note
Use the ribbon remaining display as a criterion.
1
Display the OUTPUT SETUP menu.
2
Select the RBN REMAIN item, then select whether
or not the type of ink ribbon and the remaining
amount are to be displayed on the monitor.
Ink ribbon information
Registering a User Set
You can store up to three settings of all the printer
specifications set or adjusted by using the buttons or the
When you want to
Selection
Sound the tones.
ON
Disable the tones.
OFF
Adjust the brightness by pressing
the
G
or
g
button.
Baud rate (bps) Baud rate displayed on the
menu. (The display changes
from first two digit indication to
four digit indication.)
1200
12
t
1200
2400
24
t
2400
4800
48
t
4800
9600
96
t
9600
When you want to
Setting
Display the remaining amount.
ON
Erase the information about the
remaining amount of the ink ribbon.
OFF
Icon of ink ribbon
When the ink ribbon runs out
or is not loaded, the message
“SET RIBBON” appears.
Number of printouts
that can be made
with the ribbon
