Mi
s
c
el
lane
ous
Precautions
26
11
Open the ribbon door, and remove the cleaning
ribbon.
To clean the paper feed roller
If the paper feed rollers are dirty, gently wipe the rollers
with a soft cloth moistened with alcohol while turning
the rollers.
When the following symptoms appear
When the message “HEAD COOLING PLEASE
WAIT” begins to appear on the information
display frequently:
Ventilation holes are located on the rear and side panels
of the printer. Clean the filter on the rear panel of the
printer. If the filter is dirty, the time required for cooling
the thermal head is lengthened and this causes the
printing time to become longer.
1
Press upward on the top portion of the filter cover,
and remove the filter cover.
2
Remove the filter from the filter cover.
The filter is held to the filter cover at four different
points.
3
Wash the filter with water to remove the dust.
Note
Do not rub the netting of the filter roughly.
4
After the filter is completely dry, reattach it to the
filter cover.
5
Reattach the filter cover onto the printer.
Paper feed roller
