Sony UP-27MD Instructions For Use Manual Download Page 11

Page: 11 / 90

Introduction

System Features

The UP-27MD is a color video printer that captures

images from an imaging output device such as

video equipment and prints the images at A6 size

with simple operations. It prints images by

pressing a thermal head, heated according to the

input image data, against a dedicated ink ribbon

coated with sublimation ink, transferring the ink

onto special thermal printing paper.

The UP-27MD has the following features:

• High picture quality and high print resolution

The printer allows you to print out high

resolution images in full color in high resolution

print mode (approximately 423 dpi).

• Menu settings to meet your preferences

You can create a variety of prints including

reduced images and images with captions. See

“Making Variations of Printouts” (page 30) for

details on operations.

Ordinary print operations can be performed

using the buttons on the printer. Depending on

the operation you want perform, you can use

the window display on the printer or a

connected monitor display to configure printer

settings and perform various adjustments as

necessary.

• SDI (SD/HD/3G) signal input/output support

SD, 1080i, and 1080p signal formats are

supported. Signal formats are automatically

detected via settings.

• High-definition display window

A high-definition display window on the front

panel makes it easy to check the printer status

and use the menu.

Part Names and

Functions

Front



PRINT indicator

Lights while printing is in progress.



ALARM indicator

Lights when an error such as a paper jam

occurs.



Printer window display

Displays the normal printer status.

When operating menus, the printer window

also indicates the line on which the menu

cursor is positioned.

If errors occur, messages are displayed.

The contrast and brightness of the printer

window display can be adjusted. For details,

see “Adjusting the printer window display”

(page 73).



MENU button

Switches between the menu and normal

screen display.



DISPLAY button (see pages 26, 46)

When the normal screen is displayed:

Pressing this button shows/hides the screen

display (printer setting information and

pointers displayed on the video monitor).

When this button is pressed, the [Information

Display] screen is displayed for a few seconds,

allowing you to set whether or not to show

the screen display. [Information Display] in

the [Output Setup] tab of the [User Setup]

menu also changes in conjunction with each

press of this button.

Summary of Contents for UP-27MD



























































































Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands

Sony UP-27MD, Instructions For Use Manual

Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands