Sony UP-27MD Instructions For Use Manual Download

Page: 73 / 90

If not, press the SOURCE/MEMORY button to

display the source image. When multiple reduced

images are being captured, after the last image is

captured, the printer starts printing (or queues

printing), then switches to the next memory page.

b) When multiple reduced images are being

captured, after the last image is captured, the

printer goes to the next memory page.

Setting the communication speed

with a printer

When controlling the printer with a computer

connected to the printer’s RS-232C connector,

select the appropriate communication speed

(baud rate).

Display the [Remote Setup] tab of the [System

Setup] screen.

Select [Baudrate], then select the desired

communication speed.

Setting the operation and alarm

sounds

Activate or inactivate operation tone sounds (one

time) whenever you press a button on the printer

and alarm tone sounds (three times) when an

error occurs.

Display the [Machine Setup] tab of the

[System Setup] screen.

Select [Beep] and choose whether or not to

allow the buzzer to sound.

Adjusting the printer window

display

When it is hard to read the contents of the printer

window display, adjust the contrast and

brightness.

Display the [Machine Setup] tab of the

[System Setup] screen.

Adjust the printer window display view.

Setting the tray light

Set the printer tray light function and brightness.

Display the [Machine Setup] tab of the

[System Setup] screen.

Set the tray light function and brightness.

Printing the setting value list

You can print almost all menu setting values, with

the exception of a few items.

Notes

• The [Save User Setup] setting values in the [User

Setup] menu are not printed.

Option

1200
2400
4800 (default value)
9600

Option

Description

On (default

value)

Activates operation and alarm tones.

Off

Inactivates operation and alarm

tones.

Setting

item

Setting

range

(default

value)

Description

LCD

Contrast

0 to 14 (7) Adjusts the contrast of the

printer window display.

The larger the value, the

darker the display is.

LCD

Backlight

0 to 10 (5) Adjusts the printer window

display brightness.

The larger the value, the

brighter the printer

window display is.

Setting

item

Option

Description

Tray Light Mode1

(default

value)

The tray light shines for

approx. 5 seconds after

printouts eject.

Mode2

The tray light is always on.

Mode3

The tray light is always off.

Tray Light

Level

Level1

Select the tray light

brightness.

[Level1] is the darkest

setting, and [Level3] is the

brightest. [Level2] is the

median brightness.

Level2

(default

value)
Level3

Summary of Contents for UP-27MD



























































































Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands

Sony UP-27MD, Instructions For Use Manual

Search results

Summary of Contents for UP-27MD

Reviews:

Related manuals for UP-27MD

Brands by name

Popular brands