–
25
–
KV
-XA29M60/XA29M84
RM-954 RM-953
Using Your New TV
4
Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the
Connecting a VCR
diagram below.
Connecting a VCR
To watch the video input, press
t
(see page 11).
: Signal flow
To video
and audio
outputs
IEC connector
(not supplied)
or
: Signal flow
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
To
t
1, 2 or 3
(video input)
(yellow)
-L (MONO) (white)
-R (red)
Audio/Video cable (not supplied)
To S video
output
Rear of TV
VCR
To
8
(antenna)
To antenna
output
To
(S video input)
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
1
2
3
R
L
Y
C
B
C
R
Antenna cable (not supplied)
S video cable
(not supplied)
CAUTION
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
5
Using Your New TV
Using Y
our New TV
Notes
• If you connect a monaural VCR, connect the yellow plug to
(the yellow
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the (antenna) terminal, preset the signal output
from the VCR to the program number 0 on the TV.
• If both
(S video input) and
t
1 (video input) at the rear of your TV
are input at the same time, the
(S video input) is automatically
selected. To view the video input to
t
1 (video input), disconnect the
S video cable.
• Do not connect video equipment to the
t
3 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Tips
• If you want to stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 27).
Front of TV
PROGR
MENU
AUTO
PROGR
ENTER
SELECT
L(MONO)
3
1
2
