– 15 –
KV-DZ29M50
RM-GA002
d. MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, pull out the plug from AC outlet, and then plug into AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confirm adjustments were made.
e. OTHER FUNCTION VIA REMOTE COMMANDER
7
,
-
All the data becomes the values in memory.
8
,
-
All user control goes to the standard state.
Display,
-
Service data initialization (Be sure not to use usually.)
2
,
5
Select Device or Category
5-2.
ADJUSTMENT METHOD
Item Number 000 HPOS
This explanation uses H POSITION as an example.
1. Select "000 HPOS" with the
1
and
4
buttons, or
2
and
5
.
2. Raise/lower the data with the
3
and
6
buttons.
3. Select the optimum state. (The standard is IF for PAL reception.)
4. Write with the
button. (
(mute icon))
5. Execute the writing with the
-
button. (The WRITE display will be changed to red color while executing, and back to
SERVICE.)
Example on screen display :-
Use the same method for all Items. Use
1
and
4
to select the adjustment item, use
3
and
6
to adjust, write with
, then
execute the write with
-
.
Note
: 1. In
[WRITE]
, the data for all items are written into memory together.
2. For adjustment items that have different standard data between 50Hz or 60Hz, be sure to use the respective input
signal after adjustment.
Adjusted with
[3]
and
[6]
buttons.
GREEN
WHBL
000
WBP
000
SERVICE
50
VIDEO 1
write with
.
GREEN
WHBL
000
WBP
000
WRITE
50
VIDEO
1
WHBL
000
WBP
000
WRITE
50
VIDEO
1
Write executed with
[0]
.
RED
The WRITE display
then returns to green
SERVICE
