Sony Trinitron KV-AR212M50 Page 120 Service Manual Download

Page: 120 / 152

Additional Information

Sony KV-AR212M61 Group G1 (

GB,

CT, MY)_2-179-784-11 (1)

Troubleshooting

If you find any problem while viewing your TV, please check the following
guide. If any problem persists, contact your Sony dealer.

Troubleshooting guide

continue

Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

No picture

No sound

Possible cause

Symptom

Solutions

Page

–

• Check the antenna cable and connection

on the TV, VCR and at the wall.

• Check the antenna setup.

Contact a Sony dealer for advice.

• Display the “Channel Setup” menu and

select “Manual Program” to preset the
channel again.

• Display the “Channel Setup” menu and set

the “Signal Booster” to “Auto” from
“Manual Program”.

• Try using an external booster.

• Turn off or disconnect the external booster

if it is in use.

• Display the “Channel Setup” menu and

set the “Signal Booster” to “Off” from
“Manual Program”.

• Display the “Channel Setup” menu and

select the appropriate “TV System” from
“Manual Program”.

• Check the power cord, antenna and VCR

connections.

• Press

?/1

(power).

• Press

(main power) on the TV to turn

off the TV for about five seconds, then
turn it on again.

• The connection is loose

or the cable is
damaged.

• The antenna setup is

inappropriate.

• Channel presetting is

inappropriate or
incomplete.

• Signal transmission is

low.

• Broadcast signals are

too strong.

• The TV system setting

is inappropriate.

• The power cord,

antenna or VCR is not
connected.

• The TV is not turned

on.

01GB08ADV-MLY.p65

6/18/04, 9:38 AM

Black

Summary of Contents for Trinitron KV-AR212M50

























































































































































Search results

Summary of Contents for Trinitron KV-AR212M50

Reviews:

Related manuals for Trinitron KV-AR212M50

Brands by name

Popular brands

Sony Trinitron KV-AR212M50, Service Manual

Search results

Summary of Contents for Trinitron KV-AR212M50

Reviews:

Related manuals for Trinitron KV-AR212M50

Brands by name

Popular brands