number buttons
DISPLAY button
CABLE BOX button
JUMP button
ENTER button
VOL (volume)
buttons*
CH (channel)
buttons’
VTR
CODE SET button
(Pre-Programmed function)
A/V WINDOW (audio and
adjusting) buttons
Channel presetting buttons
PIP
buttons
Video operating buttons
MTS (multichannel TV sound) button
CABLE button
I n s t a l l i n g
Remove the battery
cover.
I
Battery life
normal
will
up to hall a year.
If the Remote Commander does not operate properly, the
be exhausted. Replace both with new ones.
To
damage from possible battery leakage
Remove the
when the Remote Commander will
not be used for a long time.
2
Insert two
AA
correct polarity.
1-2. PRESETTING TV CHANNELS
VHF channels (2 13) have been preset on your TV. You can watch those TV channels without further
by
the steps under
TV Programs” on
For UHF and cable channels. you must first preset channels
T V
If you have
pressed the CABLE BOX button, the Remote
Commander set to control the cable converter box. not the TV. Press the
TV
order to control
TV with the Remote Commander.
1
Press POWER on the TV or the Remote Commander to turn the TV on
POWER
n
2
Press CABLE so that a channel number appears the mode that
you want to preset. TV or cable.
To preset
or UHF channels
To preset cable
channels
Channels that can be
TV:
VHF. 2 13
UHF
-69
Cable:
To add channels that could not be preset automatically because
erase unnecessary
unnecessary
next page.
