KV-27
S
E
T
B-Y ADJUSTMENT
1) Input a color-bar signal.
2) Set to PICTURE IN PICTURE mode.
3) Connect an oscilloscope to TP-46 B.
4) Adjust RV 2200 so that the wavefront as shown in
figure.
picture blue
picture white
picture green
R-Y ADJUSTMENT
1) Input a color-bar signal.
2) Set to PICTURE IN PICTURE mode.
3) Connect an oscilloscope to TP-46 R.
4) Adjust RV 2201 so that the wavefront as shown in
figure.
picture red
picture white
PICTURE
1) Input a monoscope signal.
2) Set to PICTURE IN PICTURE mode.
3) Adjust
so that A and B are same
size.
A
B
side
side
[SUB PICTURE POSITION ADJUSTMENT(RV
1) Input a cross-hatch signal.
2) Set to PICTURE IN PICTURE mode.
3) Adjust RV 2103 so that the SUB PICTURE is a
suitable position.
p i c t u r e g r e e n