Sony TRINITRON KV-20S90 Page 74 Service Manual Download

Page: 74 / 94

Using the Menus

MOVIE RATINGS

(U.S. models only)

This system defines the rating levels of movies shown on the big screen
and those on prime cable channels.

UNRATED

(U.S. models only)

You have the option of blocking TV programs or movies that are not
rated.

If you choose to block unrated TV programs, please be aware the following
programs may be blocked: emergency broadcasts, political programs, sports,
news, public service announcements, religious programs and weather.

Rating

Defined as

General audience

Parental Guidance suggested

PG-13

Parents Strongly cautioned

Restricted

NC-17

No one 17 and under admitted

Adult audience only

Rating

Defined as

VIEW ALL

No block

BLOCK
TV

Block all unrated TV
programs

BLOCK
MOVIE

Block all unrated movies

BLOCK
ALL

Block all unrated
programming

Summary of Contents for TRINITRON KV-20S90































































































Search results

Summary of Contents for TRINITRON KV-20S90

Reviews:

Related manuals for TRINITRON KV-20S90

Brands by name

Popular brands

Sony TRINITRON KV-20S90, Service Manual

Search results

Summary of Contents for TRINITRON KV-20S90

Reviews:

Related manuals for TRINITRON KV-20S90

Brands by name

Popular brands