Sony TMS Training Manual Download Page 5

Page: 5 / 49

Integrator Training, UK

Confidential

Digital Cinema Deployment

5 of 49

October 15

CHIPS Stand-Alone Integrator Installation Training (CHIPS)

1 Schematics

Populate the pre-wired CHIPS rack using the following schematics.

1.1

CHIPS Rack Layout Description

UPS -

Uninterruptable Power Supply that will power the CHIPS system in the event of

a power cut. The UPS will do a clean shutdown of the system when the battery level

goes below a determined level.

TMS SERVER -

The TMS server is where the Theatre Management System (TMS)

software is installed. All ingests of DCPs go through the TMS server either through

USB, eSATA or network interfaces. The CineWatch application is also installed which

provides a system monitoring service over SNMP. It also provides an increased level

of support as Sony can monitor and access the system remotely (if VPN link is

available). Upgrades of the projector firmware/software can be done remotely using

CineWatch

Summary of Contents for TMS


















































Search results

Summary of Contents for TMS

Reviews:

Related manuals for TMS

Brands by name

Popular brands

Sony TMS, Training Manual

Search results

Summary of Contents for TMS

Reviews:

Related manuals for TMS

Brands by name

Popular brands