− 10 (GB) −
Installing the TV on the Wall
1
3
Attach the
WM2
to the TV using
the screw (previously removed
on step 2).
WM2
Screw
4
Detach the Table-Top Stand from
the TV.
Note
Be careful when lifting the TV as the Table-Top
Stand is detached, the Table-Top Stand may topple
over and cause personal injury.
Take care when removing the Table-Top Stand from
the TV to prevent it from falling over and damaging
the surface that the TV is sitting on.
Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
the TV.
Be sure the TV is vertical before turning on. To
avoid uneven picture uniformity do not power on
the TV with the panel facing down.
When attaching the Table-Top Stand again, be sure
to fasten the screws (previously removed) to the
original holes on the rear of the TV.