Sony SU-PW2, Instructions Manual, Page: 8 / 84

SU-PW2 4-099-792-42(1)
8
(GB)
Step 2: Decide on the installation location
1 Unit: mm
300
100
100
100
Place the paper template on a perpendicular, flat
wall and decide on the installation location.
Tape the supplied 3 sheets of the paper template
together with commercially available adhesive tape. For
details, refer to the instructions printed on the paper
template.
Allow for suitable clearance between the Display Unit
and the ceiling and protruding parts of the wall as
shown in the diagram on the right.
Note
If you intend to route the cables in a wall, make a hole in the wall
beforehand to make sure that the cables can be drawn into the wall.
The positions for the cable holes are printed on the paper template and
on page 10 according to the Display Unit model.
1
2
Plate Unit (1) Mounting Hook Unit (2)
Hook (4)
Paper Template
(1 set of 3 sheets)
Screw (+PSW5
×
L16) (6)
Screw (+B6
×
L20) (2)
Step 1: Check the parts required for the installation
Prepare a Phillips screwdriver and the appropriate screws (four or more M8 (or equivalent)
screws, not supplied), depending on the material of the wall, beforehand.
Open the package and check the parts.