manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 84

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Connecting the antennas (aerials)

Connect the supplied antennas (aerials) to the receiver as illustrated below.
Before connecting antenna (aerial), be sure to disconnect the AC power cord (mains lead).

 

AM loop antenna (aerial) (supplied)

 

FM wire antenna (aerial) (supplied)

Note

To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other devices.

Be sure to fully extend the FM wire antenna (aerial).

After connecting the FM wire antenna (aerial), keep it as horizontal as possible.

Related Topic

Notes on connecting cables

4-686-529-11(5) Copyright 2017 Sony Corporation

84

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands