Sony STR-ZA1100ES, Help Manual

Page: 197 / 333

Help Guide
MULTI CHANNEL AV RECEIVER
STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES
Outputting a test tone from each speaker (Test Tone)
You can output a test tone from each speaker in sequence.
Hint
You can set a test tone by pressing the TEST TONE button on the remote control. In this case, you can only use the display
panel for the operation.
To adjust the level of all speakers at the same time, press +/–. You can also use MASTER VOLUME on the receiver.
The adjusted value is shown on the TV screen during adjustment.
4-686-529-11(5) Copyright 2017 Sony Corporation
Select [Setup] - [Speaker Setup] from the home menu.
1
Select [Test Tone].
2
Select the setting you want.
Off
Auto:
The test tone is output from each speaker in sequence.
Front L, Center, Front R, Surround R, Surround L, Sur Back (*1) , Sur Back L, Sur Back R, Height1 L (*2) ,
Height1 R (*2) , Height2 L (*2) , Height2 R (*2) , Height L (*3) , Height R (*3) , Subwoofer: You can select which
speakers will output the test tone.
3
[Sur Back] appears when only one surround back speaker is connected.
*1
for STR-ZA3100ES/STR-ZA2100ES *2
for STR-ZA1100ES *3
Adjust the speaker level.
4
197