manualshive.com logo in svg

Sony STR-ZA1100ES, Help Manual

Share
Download
Sony STR-ZA1100ES Help Manual Download Page 218

Help Guide

MULTI CHANNEL AV RECEIVER

STR-ZA3100ES/STR-ZA2100ES/STR-ZA1100ES

Compressing the dynamic range (Dynamic Range Compressor)

You can compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at a low
volume late at night, etc.
This function only works for Dolby Digital and Dolby TrueHD sources.

Note

This function does not work when [Pure Direct] is set to [On].

4-686-529-11(5) Copyright 2017 Sony Corporation

Select [Setup] - [Audio Setup] from the home menu.

1

Select [Dynamic Range Compressor].

2

Select the setting you want.

Auto:

 The dynamic range is compressed automatically when there is a flag in the sound source that

recommends using the Dynamic Range Compressor function.

On:

 The dynamic range is compressed as intended by the recording engineer.

Off

3

218

Summary of Contents for STR-ZA1100ES














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands