STR-DN1010
60
Pin No.
Pin Name
I/O
Description
123
SIRCS
I
SIRCS signal input from the remote control receiver
124
DIR_CE
O
Chip enable signal output to the digital audio interface receiver
125
DIR_DO
I
Serial data input from the digital audio interface receiver
126
DIR_ERROR
I
PLL lock error signal and data error
fl
ag input from the digital audio interface receiver
127
MD3
-
Mode setting terminal Fixed at “L” in this set
128
MD2
I
Mode setting input from the DSP
129, 130
MD1, MD0
-
Mode setting terminal Fixed at “L” in this set
131
INITX
I
System reset signal input from the reset signal generator “L”: reset
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H”
132
VSS_(GND)
-
Ground terminal
133
VCC5
-
Power supply terminal (+3.3V)
134
SI_Rx
I
Serial data input from the DSP
135
SO_Tx
O
Serial data output to the DSP
136
NO_USE
-
Not used
137
RST_TRIGGER
O
Reset signal output terminal for the system controller “L”: reset
138
EEPROM_SDA
I/O
Two-way data bus with the EEPROM
139
EEPROM_SCL
O
Serial data transfer clock signal output to the EEPROM
140
FL_LATCH
O
Serial data latch pulse signal output to the
fl
uorescent indicator tube
141
FL_DATA
O
Serial data latch pulse signal output to the
fl
uorescent indicator tube
142
FL_CLK
O
Serial data transfer clock signal output to the
fl
uorescent indicator tube
143
SIRIUS_MISO
I
Serial data input from the SIRIUS socket (US and Canadian models only)
144
SIRIUS_MOSI
O
Serial data output to the SIRIUS socket (US and Canadian models only)
145
SIRIUS_POWER_ENA
O
Power detection signal output to the SIRIUS socket (US and Canadian models only)
146
VSS_(GND)
-
Ground terminal
147
VCC5
-
Power supply terminal (+3.3V)
148
DMPORT_MISO
I
Serial data input from the DMPORT connector
149
DMPORT_MOSI
O
Serial data output to the DMPORT connector
150
DMPORT_DETECT
I
DMPORT adapter connection detection signal input terminal
“H”: DMPORT adapter is connected
151
SPI0_MISO
I
Serial data input from the serial
fl
ash and DSP
152
SPI0_MOSI
O
Serial data output to the serial
fl
ash and DSP
153
SPI0_CLK
O
Serial data transfer clock signal output to the serial
fl
ash and DSP
154
VU_TX (MOSI)
I
HDMI UART Rx (Micom Receive)
155
VU_RX (MISO)
O
HDMI UART Tx (Micom Transmit)
156
NO_USE
-
Not used
157
DIR_CKST
I
Clock selection signal input from the digital audio interface receiver
158
DIR_SIGNAL
I
Audio serial data input from the digital audio interface receiver
159
DIGI_DATA_MUTE
I
Muting control signal output terminal
160
ANA_DIGI
O
Analog/digital selection signal output terminal
161
VSS_(GND)
-
Ground terminal
162
VCC5
-
Power supply terminal (+3.3V)
163
TUNER_RDS_INT
(CLK)
I
RDS serial data transfer clock signal input from the tuner (FM/AM)
(For CE only)
164
DIR_INT
I
DIR interrupt (connect INT for ready, use GP10)
165
FUSE_DET
I
Fuse Detect
166
DSP_INT
I
Interrupt signal input from the DSP
167, 168
NO_USE
-
Not used
169
FSRATE
I
L/R sampling clock signal input from the digital audio interface receiver and HDMI receiver
170
DIR_HDMI_SELECT
O
Digital audio interface receiver/HDMI receiver signal selection signal output terminal
171
NO_USE
O
Not used
172
NON_AU
O
DSP Non Audio
173
SFLASH_HOLD
O
Hold signal output to the serial
fl
ash
174
SPI0_CS
O
Chip select signal output to the DSP
175
DSP_RESET
O
Reset signal output to the DSP “L”: reset
176
VCC5
-
Power supply terminal (+3.3V)
