STR-DN1010
11
SECTION 3
TEST MODE
TUNER AM STEP CHANGE MODE
(US and Canadian models only)
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
1. Press the [
?/1
] button to turn on the main power.
2. Press the [– INPUT SELECTOR]/[INPUT SE]
buttons to select the “AM TUNER”.
3. Press the [
?/1
] button to turn off the main power.
4. While pressing the [DISPLAY] button, press the [
?/1
] button
to turn on the main power.
5. Either the message “AM 9k Step” or “AM10k Step” appears,
select the desired step.
6. After a few second, “AM 531 kHz” or “AM 530 kHz” appears,
select the desire step.
SOUND FIELD CLEAR MODE
The preset sound
fi
eld is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [MUSIC] button, press the [
?/1
] button to
turn on the main power.
2. The message “S.F. CLEAR” appears and initialization is per-
formed.
INITIALIZE MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
(a) SHIPMENT MODE
Procedure:
1. While pressing the [DISPLAY] and [A.F.D.] buttons, press the
[
?/1
] button to turn on the main power.
2. The message “CLEARING” appears and the memories are re-
set to the default values.
3. When done, the message “CLEARED !” appears, the set will
power off.
(b) ALL CLEAR INITIALIZE
Procedure:
1. While pressing the [SPEAKERS] and [MUTING] buttons,
press the [
?/1
] button to turn on the main power.
2. The message “CLEARING” appears and the memories are re-
set to the default values.
3. When done, the message “BD” appears after “CLEARED !”.
(c) USER INITIALIZE
Procedure:
1. Hold the [
?/1
] for 5 seconds.
2. The message “CLEARING” appears on the display.
3. After a few seconds, “CLEARED !” appears.
FLUORESCENT INDICATOR TUBE DISPLAY TEST
All
fl
uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
While pressing the [MUTING] and [DISPLAY] buttons, press the
[
?/1
] button to turn on the main power.
1. ALL segments light on.
LH SW RH
S
SL
SR
L
C
R
SBL
SB SBR
PLII
x z
ANALOG
D.L.L.
A.P.M D.RANGE SIRIUS ST AAC
D.C.A.C. EQ RDS CAT MEM
DTS – HD
'76±(6»
LPCM SLEEP
MSTR HI RES LBR
S–AIR ZONE
SP
MHz
k Hz
dB m
A B
3
BI–AMP
HDMI OUT A B
HDMI COAX OPT MULTI ARC
D + EX
HD NEO: 611
True
LFE
2. Press the [DISPLAY] control, con
fi
rm display.
LH
SW
RH
S
SL
SR
L
C
R
SBL
SB
SBR
PLII
x
z
ANALOG
D.L.L.
A.P.M
D.RANGE SIRIUS ST AAC
D.C.A.C. EQ RDS CAT MEM
DTS – HD
'76±(6»
LPCM
SLEEP
MSTR HI RES LBR
S–AIR ZONE
SP
MHz
k Hz
dB m
A
B
3
BI–AMP
HDMI OUT A B
HDMI COAX OPT MULTI
ARC
D + EX
HD
NEO: 611
True
LFE
3. Press the [DISPLAY] control, con
fi
rm display.
LH
SW
RH
S
SL
SR
L
C
R
SBL
SB
SBR
PLII
x
z
ANALOG
D.L.L.
A.P.M
D.RANGE SIRIUS ST AAC
D.C.A.C. EQ RDS CAT MEM
DTS – HD
'76±(6»
LPCM
SLEEP
MSTR HI RES LBR
S–AIR ZONE
SP
MHz
k Hz
dB m
A
B
3
BI–AMP
HDMI OUT A B
HDMI COAX OPT MULTI
ARC
D + EX
HD
NEO: 611
True
LFE
4. Press the [DISPLAY] control, all segments light off.
SWAP MODE
The signal will be swap to all channel so that all speaker will have
sound output.
Procedure:
1. While pressing the [SPEAKERS] and [2CH/A.DIRECT]
buttons, press the [
?/1
] button to turn on the main power.
2. The message “SWAP MODE” appears (No change while dis-
played).
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the [MUTING] and [DIMMER] buttons, press
the [
?/1
] button to turn on the main power.
2. Either the message “C. MODE AV1” or “C. MODE AV2” ap-
pears. Select the desired mode.
PROTECTOR OFF MODE
This mode switching on/off the protector to investigate the cause
of the protector.
Procedure:
1. While pressing the [INPUT MODE] and [A.F.D.] buttons,
press the [
?/1
] button to turn on the main power.
2. “PROT OFF” appears and switch off the set.
