STR-DH550/DH750
2
1)
Supports YUV 4:2:0 / 8 bit format only.
2)
Supports 8 bit format only.
3)
These formats are also supported by an MHL connection.
MHL section
Supported MHL version
Incorporates MHL 2
Maximum current
900
mA
iPhone/iPod section
DC 5V 1.0 A MAX
USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPhone 3G, iPod touch (2nd through
5th generation), iPod classic, and iPod nano (3rd through 7th
generation).
Bluetooth
technology works with iPhone 5s, iPhone 5c, iPhone
5, iPhone 4s, iPhone 4, iPhone 3GS, and iPod touch (4th and 5th
generation).
You can use “SongPal” app with this receiver via
Bluetooth
.
USB section
Supported format*
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
WMA:
48 kbps – 192 kbps
AAC:
48 kbps – 320 kbps
WAV:
8 kHz – 48 kHz, 16 bit PCM
* Compatibility with all encoding/writing software, recording
devices and recording media cannot be guaranteed.
Transfer speed
Full-speed
Supported USB device
Mass Storage Class
Maximum current
500
mA
Bluetooth section
Communication system
Bluetooth
Specification version 3.0
Output
Bluetooth
Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (33 feet)
1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible
Bluetooth
profiles
2)
A2DP (Advanced Audio Distribution Profile)
AVRCP 1.3 (Audio Video Remote Control Profile)
Supported Codecs
3)
SBC
4)
, AAC, aptX
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)
1)
The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a microwave
oven, static electricity, cordless phone, reception sensitivity,
antenna’s performance, operating system, software application,
etc.
2)
Bluetooth
standard profiles indicate the purpose of
Bluetooth
communication between devices.
3)
Codec: Audio signal compression and conversion format
4)
Subband Codec
General
Power requirements
Area
Power requirements
US, CND, TW
120 V AC, 60 Hz
MX
127 V AC, 60 Hz
AUS
230 V AC, 50 Hz
AEP, UK, E12
230 V AC, 50/60 Hz
BR
127/220 V AC, 60 Hz
E12
220 V – 240 V AC, 50/60 Hz
Power consumption
240 W (Except DH550 : AEP, UK, US, CND, AUS, E12)
200 W (DH550 : AEP, UK, US, CND, AUS, E12)
Power consumption (during standby mode)
0.3 W (When “Control for HDMI”, “Pass Through” and
“Bluetooth Standby” are set to “Off”.)
0.5 W (When “Control for HDMI” is set to “On”, “Pass
Through” and “Bluetooth Standby” are set to “Off”.)
Dimensions (width/height/depth) (Approx.)
430 mm × 156 mm × 329.4 mm
(17 in × 6 1/4 in × 13 in) including projecting parts and
controls
Mass (Approx.)
E12 model:
8.0kg (17 lb 11 oz)
Other models:
7.6kg (16 lb 13 oz)
Design and specifications are subject to change without notice.
HDMI Video
Input/Output (HDMI Repeater block)
Format
2D
3D
Frame packing
Side-by-Side
(Half)
Over-Under
(Top-and-Bottom)
4096 × 2160p @ 59.94/60 Hz
a
1)
–
–
–
4096 × 2160p @ 50 Hz
a
1)
–
–
–
3840 × 2160p @ 59.94/60 Hz
a
1)
–
–
–
3840 × 2160p @ 50 Hz
a
1)
–
–
–
4096 × 2160p @ 23.98/24 Hz
a
2)
–
–
–
3840 × 2160p @ 29.97/30 Hz
a
2)
–
–
–
3840 × 2160p @ 25 Hz
a
2)
–
–
–
3840 × 2160p @ 23.98/24 Hz
a
2)
–
–
–
1920 × 1080p @ 59.94/60 Hz
a
–
a
a
1920 × 1080p @ 50 Hz
a
–
a
a
1920 × 1080p @ 29.97/30 Hz
a
3)
a
a
3)
a
3)
1920 × 1080p @ 25 Hz
a
3)
a
a
3)
a
3)
1920 × 1080p @ 23.98/24 Hz
a
3)
a
a
3)
a
3)
1920 × 1080i @ 59.94/60 Hz
a
3)
a
a
3)
a
3)
1920 × 1080i @ 50 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 59.94/60 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 50 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 29.97/30 Hz
a
3)
a
a
3)
a
3)
1280 × 720p @ 23.98/24 Hz
a
3)
a
a
3)
a
3)
720 × 480p @ 59.94/60 Hz
a
3)
–
–
–
720 × 576p @ 50 Hz
a
3)
–
–
–
640 × 480p @ 59.94/60 Hz
a
3)
–
–
–
Supplied accessories
• Quick Setup Guide (1)
• Reference Guide (1)
• Remote control (RM-AAU190) (1)
• R6 (size AAA) batteries (2)
• FM wire antenna (aerial) (1)
• AM loop antenna (aerial) (1)
• Optimizer microphone (ECM-AC2) (1)
Design and specifications are subject to change
without notice.
•
Halogenated flame retardants are not used
in the certain printed wiring boards.
Abbreviation
AUS : Australian model
BR :
Brazilian
model
CND : Canadian model
E12 : 220 – 240V AC area in E model
MX :
Mexican
model
TW :
Taiwan
model
Ver. 1.1
