STR-DH550/DH750
12
FIX MODEL AND DESTINATION MODE
This mode is to fix the set for model & destination.
When turning on the set, the message below appears if the setting
is not fixed with its model or destination or both (model & destina-
tion).
Items
Display
MODEL & AREA NOT
FIX
M D. D S T. U N F I X
MODEL NOT FIX
M O D E L. U N F I
X
AREA/DESTINATION
NOT FIX
D E S T. U N F I X
Procedure:
1. Press the [
?
/
1
] button to turn on the main power.
2. While pressing [DISPLAY] button, press and release the
[A.F.D./2CH], [MOVIE], [MUSIC] button in order, the
message “SPECIALIZE” appears.
3. Press the [
M
] or [
m
] key of the remote commander, the
message “<SPECIAL>” appears.
4. Press the [
] key of the remote commander to enter the
Special Menu List.
5. Each time the [
M
] or [
m
] key of the remote commander is
pressed, the item is switched in order as follows.
Items
Display
MODEL
setting
M
O
D
E
L
DESTINATION setting D E S T I
N Y
MODEL &
DESTINATION check
M O D E L + D E S T
SYSTEM
VERSION
S Y S v X. X X X
MAIN VERSION
M A I
N
v X. X X
VIDEO VERSION
V I
D E O
v X. X X
OSD VERSION
O S D
v X. X X
DSP SFLASH1 VER
S F L A S H v X. X X
6. Go to MODEL setting and press the [
] key of remote
commander.
7. Either one of the message as below appears.
Items
Display
Model not fix
yet
M O D E L. U N F I X
Model STR-H55 fix
H 5 5 f i x
Model STR-H75 fix
H 7 5 f i x
8. Press the [
M
] or [
m
] key of remote commander to set model
info as “H55 fi x” or “H75 fi x” if message “MODEL UNFIX”
appears.
9. Press the [
] key of remote commander to select the model.
10. The message “MODEL” appears.
11. Go to DESTINATION setting and press the [
] key of
remote commander.
12. Either one of the display below appears according to the
destination of the set.
Items
Display
Destination
D E S T U N F I X
Destination UCA
fix
U
C
A
f i x
Destination J
fix
J
f i x
Destination TW/SA2 fix
T
W
f i x
Destination SP/CN fix
C
N
f i x
Destination KR
fix
K
R
f i x
Destination E2/E3 fix
C
H
3
f i x
Destination CEL
fix
C
E
L
f i x
Destination AU
fix
A
U
f i x
Destination E12
fix
E 1 2 f i x
Destination E51
fix
E 5 1 f i x
Destination BR
fix
B
R
f i x
Destination AR
fix
A
R
f i x
Destination MX
fix
M
X
f i x
13. Press the [
M
] or [
m
] key of remote commander to set
destination info if message “DEST UNFIX” appears.
14. Press the [
] key of remote commander to select the
destination.
15. The message “DESTINY” appear.
16. Go to MODEL & DESTINATION check and press the [
]
key of remote commander.
17. Either one of the message as below appears.
Items
Display
MODEL & AREA NOT FIX M D. D S T. U N F
I
X
MODEL NOT FIX
M O D E L. U N F
I
X
DESTINATION NOT FIX
D E S T.
U N F
I
X
STR-H55
H 5
5
x
x
x
STR-H75
H 7
5
x
x
x
xxx:
Area
display
18. Repeat step (6) onwards if message “MD.DST.UNFIX”
appears.
19. Repeat step (6) until step (10) and continue with step (16)
onwards if message “MODEL.UNFIX” appears.
20. Repeat step (13) onwards if message “DEST. UNFIX”
appears.
21. Set need to be reset and updated again if the message
appeared incorrectly.
22. Press the [
M
] or [
m
] key of remote commander goes to “MD.
DST.UNFIX”.
23. Press the [
] key of remote commander.
24. The set will power off and then power on by itself.
25. Start the setting again from step (1) onwards.
26. Perform SHIPMENT MODE if the message appears correctly.
27. The set will be power off itself and can be used as normal by
pressing [
?
/
1
] button.
Ver. 1.1
