Sony STR-DA7100ES - Fm Stereo/fm-am Receiver Operating Instructions Manual Download Page 43

Page: 43 / 139

tting Star

4: Connecting the antennas

Connect the supplied AM loop antenna and
FM wire antenna.

* The shape of the connector varies depending on

the area code of this receiver.

Notes

• To prevent noise pickup, keep the AM loop antenna

away from the receiver and other components.

• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as

horizontal as possible.

• Do not use the

SIGNAL GND terminal for

grounding the receiver.

FM wire antenna (supplied)

AM loop antenna (supplied)

Summary of Contents for STR-DA7100ES - Fm Stereo/fm-am Receiver












































































































































Search results

Summary of Contents for STR-DA7100ES - Fm Stereo/fm-am Receiver

Reviews:

Related manuals for STR-DA7100ES - Fm Stereo/fm-am Receiver

Brands by name

Popular brands

Sony STR-DA7100ES - Fm Stereo/fm-am Receiver, Operating Instructions Manual

Search results

Summary of Contents for STR-DA7100ES - Fm Stereo/fm-am Receiver

Reviews:

Related manuals for STR-DA7100ES - Fm Stereo/fm-am Receiver

Brands by name

Popular brands