Ampl
ifier O
p
e
ration
masterpage:Right
lename[E:\SEM_Janet\Revision
Data\J9050000_2580805131DA2100ES_US\2580805131\US04BSC_STR-DA2100ES-U.fm]
27
US
model name1[STR-DA2100ES]
[2-580-805-
13
(1)]
A
SW:
Lights up when sub woofer selection is
set to “YES” (page 19) and the audio signal is
output from the SUB WOOFER jacks.
B
LFE:
Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C
SP.A/SP.B:
Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D
MULTI CH IN:
Lights up when
“MULTI CH IN” is selected.
E
EQ:
Lights up when the equalizer is activated.
F
D.RANGE:
Lights up when dynamic range
compression is activated (page 42).
G
;
DIGITAL EX:
“
;
DIGITAL” lights up
when Dolby Digital signals are input.
“
;
DIGITAL EX” lights up when Dolby
Digital EX signals are input.
Note
When playing a Dolby Digital EX format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG
FIXED” (page 36).
H
DTS-ES 96/24:
“DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG FIXED”
(page 36).
I
OPT:
Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal or when INPUT MODE is
set to “OPT FIXED” (page 36).
J
COAX:
Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal or when INPUT MODE
is set to “COAX FIXED” (page 36).
K
Tuner indicators:
Lights up when using the
receiver to tune in radio stations, etc. See
pages 24–26 for tuner operations.
L
D.ASSIGN:
Lights up when the digital assign
function is used for the selected input.
M
NEO:6:
Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated. However,
this indicator does not light up if both the
center and surround speakers are set to “NO”.
About the indications in the display
MEMORY
SW
LFE
SP.A SP.B
MONO
STEREO
D.ASSIGN
COAX
OPT
SLEEP
A.DIRECT
96/24 NEO:6
MULTI CH IN
EQ D.RANGE
DTS-ES
DIGITAL EX
;
PRO LOGIC IIx
;
L
C
R
SL
S
SR
SBR
SBL SB
qd
qs
qh
qj
qf
qg
2
1
4
3
5
6
7
8
9
q;
qa
continued
US01COV_STR-DA2100ES-U.book Page 27 Wednesday, July 13, 2005 2:17 PM
