masterpage:Left
lename[E:\SEM_Janet\Revision
Data\J9050000_2580805131DA2100ES_US\2580805131\US04BSC_STR-DA2100ES-U.fm]
24
US
model name1[STR-DA2100ES]
[2-580-805-
13
(1)]
You can select the audio directly from the
components connected to the MULTI CH IN
jacks. This enables you to enjoy high quality
analog inputs such as DVD or Super Audio CD.
When the MULTI CH IN function is selected,
the equalizer cannot be used.
Press MULTI CH IN to select “MULTI CH
IN”.
To cancel the MULTI CH IN function, press
MULTI CH IN until the “MULTI CH IN”
indicators in the display turn off.
When MULTI CHANNEL
DECODING indicator lights up
The MULTI CHANNEL DECODING indicator
lights up when the receiver is decoding multi
channel sources. However, this indicator does
not light up if you select 2CH STEREO mode.
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and AM
antennas to the receiver (see page 14).
Tip
The tuning scale is:
FM: 100 kHz
AM: 10 kHz *
* The AM tuning scale can be changed (see page 65).
Automatic tuning
If you do not know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1
Turn INPUT SELECTOR to select the
FM or AM band.
The last received station is tuned in.
2
Press or TUNING –.
Press to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
If the FM stereo reception is poor and STEREO
flashes in the display, select monoural audio so
that the sound will be less distorted.
1
Press MAIN MENU to select
“
TUNER
”.
2
Turn MENU to select
“
FM MODE
”.
3
Turn –/+ to select
“
MONO
”.
The FM reception switches to monaural.
Listening to multi channel
sound
— MULTI CH IN
Listening to FM/AM radio
US01COV_STR-DA2100ES-U.book Page 24 Wednesday, July 13, 2005 2:17 PM
