Sony STR-DA2100ES Operating Instructions for STRDA2100ES Operating Instructions Manual Download

Page: 36 / 68

masterpage:Left

lename[E:\SEM_Janet\Revision

Data\J9050000_2580805131DA2100ES_US\2580805131\US06ADV_STR-DA2100ES-U.fm]

model name1[STR-DA2100ES]

[2-580-805-

(1)]

You can assign a component video input for
another visual input.

Press MAIN MENU repeatedly to select
“

CUSTOMIZE

”.

Turn MENU to select “COMPO V.
ASSIGN”.

Press MEMORY/ENTER.

Turn MENU to select the component
video input you want to assign.

Turn –/+ to select the input you want to
assign the component video input
jacks selected in step 4.

The input you can assign varies for each
component video input. For details, see
“Selectable component video inputs for
each input” on page 36.

Selectable component video
inputs for each input

Note

You cannot assign a visual input to more than one
component video input.

You can switch the audio input mode for
components which have digital audio input
jacks.

Turn INPUT SELECTOR to select the
input.

Press INPUT MODE repeatedly to
select the audio input mode.

The selected audio input mode appears in
the display.

Audio input modes

• AUTO 2CH

Gives priority to digital signals when there are
both digital and analog connections. If there
are no digital signals, analog is selected.

• COAX FIXED

Specifies the digital audio signals input to the
DIGITAL COAXIAL input jack.

• OPT FIXED

Specifies the digital audio signals input to the
DIGITAL OPTICAL input jacks.

• ANALOG FIXED

Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.

Notes

• When signals with a sampling frequency of more

than 48 kHz is input, the equalizer and sound field
cannot be used.

• You cannot select the digital audio input which is

assigned to another function by DIGITAL ASSIGN
function (page 35).

• Some of the audio input modes may be dimmed

depending on the input. This means that the selected
input is unavailable.

Assigning the component
video input

— COMPONENT VIDEO INPUT

ASSIGN

DVD

VIDEO 1, VIDEO 2, VIDEO 3, DVD

TV/SAT

VIDEO 1, VIDEO 2, VIDEO 3, TV/SAT

Switching the audio input
mode for digital
components

— INPUT MODE

US01COV_STR-DA2100ES-U.book Page 36 Wednesday, July 13, 2005 2:17 PM

Summary of Contents for STR-DA2100ES Operating Instructions for STRDA2100ES





































































Search results

Summary of Contents for STR-DA2100ES Operating Instructions for STRDA2100ES

Reviews:

Related manuals for STR-DA2100ES Operating Instructions for STRDA2100ES

Brands by name

Popular brands

Sony STR-DA2100ES Operating Instructions for STRDA2100ES, Operating Instructions Manual

Search results

Summary of Contents for STR-DA2100ES Operating Instructions for STRDA2100ES

Reviews:

Related manuals for STR-DA2100ES Operating Instructions for STRDA2100ES

Brands by name

Popular brands