107
US
D:\NORM'S JOB\SONY HA\SO120031\STR-DA1800ES_PMRF
02\4428194122_USFR\US05ENJ_STR-DA1800ES-CEL.fm
masterpage: Right
STR-DA1800ES
4-428-194-
12
(2)
Adj
u
s
tin
g Setti
ng
s
To check the software version
1
Select “Software Update”, then press
.
2
Select “Version”, then press
.
The software version appears on the TV
screen.
Bluetooth
Settings
You can adjust the settings for the
Bluetooth
.
x
Pairing
Lets you pair the
Bluetooth
device with the
receiver.
x
BT Standby (
Bluetooth
Standby)
While the “BT Standby” mode is set to “ON”,
the receiver can be controlled by the
Bluetooth
device even when the receiver is in standby
mode.
1
Select “BT Standby”, then press
.
2
Select “ON” or “OFF”, then press
.
•
ON:
The receiver turns on automatically
when the
Bluetooth
device is connected
to the receiver.
•
OFF:
The receiver does not turns on.
Note
You can only select this parameter when a
Bluetooth
device is paired.
x
Clear History
Lets you clear all paired
Bluetooth
device and
connection information from the receiver.
1
Select “Clear History”, then press
.
“Clear all history?” appears on the TV
screen.
2
Press
B
/
b
to select “OK”, then press
.
“Complete!” appears, and all history is
deleted.
Note
You cannot clear the history in the following cases.
– No paired
Bluetooth
devices in history.
– When you perform a pairing operation.
x
Address Info
Lets you check the
Bluetooth
device address
information. You can check the address
information when a
Bluetooth
device is
connected.
System Settings
You can adjust the settings of the receiver.
x
12V Trigger
Lets you select various options for use of the
12V Trigger function.
•
OFF:
Turns off output of 12V trigger even
when the main receiver is turned on.
•
CTRL:
Turns the output of 12V trigger on
or off manually using the control command
of an external control device.
•
ZONE:
Turns the output of 12V trigger on
or off based on whether the main zone is
turned on or off.
•
INPUT (for “Main” only):
Turns on the
output of 12V trigger when the preset input
is selected.
When you select “Input”, the setting display
which sets each input trigger to on/off
appears. Press
V
/
v
to select the input, then
press
to select on or off.
•
HDMI A (for “Main” only):
Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT A jack.
•
HDMI B (for “Main” only):
Turns the
output of 12V trigger on or off based on the
output setting of the HDMI OUT B jack.
x
RS232C Ctrl
Lets you turn the control mode for
maintenance and service on or off.
• ON
• OFF
continued
