background image

Specifications

SXRD Device Main Specifications

Display device 

SXRD (Silicon X-tal Reflective Display)

Size 

1.55-inch across Diagonal

Resolution 

4128 (H) X 2176 (V) pixels

Reflectivity 72 

%

Contrast (as device) 

4000 : 1

Pixel pitch 

8.5 μm

Width (between pixels) 

0.35 μm

Response speed 

2.5 ms (for both rise and fall)

Liquid crystal mode 

Normally Black Mode

Alignment layer 

Inorganic Thin Film

Backplane process 

0.35 μm MOS Process

Liquid crystal cell gap 

Less than 2 μm

 SRX-T110 

SRX-T105

Optical

Projection system 

3-SXRD panel, 1 lens projection system

Imaging device 

SXRD, 1.55-inch (diagonal), 4096(H) x 2160(V) pixels on each chip 

 (8,847,360 

pixels)

Lamp 

2 kW Xenon lamp x 2 (not supplied)  1 kW Xenon lamp x 2 (not supplied)

Light output 

11,000 lumens 

5,500 lumens

General

White reference 

Xenon white reference

  

 

Y

  

White 

reference 

0.3140 

0.3510

Contrast 2500:1
Resolution 

600 TV lines (SDI input/SMPTE-259M)

 

1920 x 1080 pixels (HD-SDI input, SMPTE-292M)

 

2048 x 1080 pixels (with LKRI-003 or LKRI-005)

 

3840 x 2160 pixels (with LKRI-003 x 4 or LKRI-005 x 4)

 

4096 x 2160 pixels (with LKRI-003 x 4 or LKRI-005 x 4)

Signal specifications 

Video: Component (Y • Cb • Cr), HD (G • B • R/Y • Pb • Pr) 

 

Computer: XGA, SXGA, UXGA

 

DVI-D: XGA, Quad-VGA, 1280 x 720, SXGA, SXGA+, UXGA, WUXGA, 

 

         1920 x 1080, 2048 x 1080

Power requirements 

AC 200 to 240 V, 50/60 Hz 

AC 100 to 240 V, 50/60 Hz

Operating temperature 

+41 °F to +95 °F (+5 °C to +35 °C)

Storage temperature 

-4 °F to +140 °F (-20 °C to +60 °C)

Operating humidity 

35 % to 85 % (no condensation) 

Storage humidity 

10 % to 90 %

Dimensions (W x H x D) 

29 1/4 x 19 5/8 x 52 1/4 inches (740 x 498 x 1326 mm)

Weight 

Approx. 265 lb (120 kg) (excluding the optional lamps and lens)

Input/Output

Input A 

LKRI-005 pre-installed (removable)

Input B 

Open for optional signal interface board

Input C 

Open for optional signal interface board

Input D 

Open for optional signal interface board

Remote interface 

RS-232C : D-sub 9-pin (female) x 1

 

10BASE-T/100BASE-TX Ethernet : RJ45 x 1

Input Boards

LKRI-001 

BNC x 5, HD/SD analog video input, RGB/Y • Cb • Cr selectable

Analog input board
 Computer 

signals

 

 

0.7 Vp-p ±2 dB positive, 75 Ω

 

 

0.7 Vp-p ±2 dB positive, 75 Ω

 

0.7 Vp-p ±2 dB positive, 75 Ω

 Sync
 

 

HD Horizontal 

TTL level, high impedance, sync positive/negative

 

HD Vertical 

TTL level, high impedance, sync positive/negative

 

Standard definition video [Y • Cb • Cr]

 

 

1.0 Vp-p ±2 dB sync negative, 75 Ω

 

 

Cb 

0.7 Vp-p ±2 dB positive, 75 Ω

 

Cr 

0.7 Vp-p ±2 dB positive, 75 Ω

 

High definition video [RGB]

 

 

0.7 Vp-p ±2 dB positive, 75 Ω

 

 

G with sync 

1.0 Vp-p ±2 dB, 75 Ω, Tri-level sync: ±0.3 Vp-p / 

 

 

 

Bi-level sync: 0.3 Vp-p

 

0.7 Vp-p ±2 dB positive, 75 Ω

 

High definition video [Y • Pb • Pr]

 

 

1.0 Vp-p ±2 dB, 75 Ω,Tri-level sync: ±0.3 Vp-p / 

 

 

 

Bi-level sync: 0.3 Vp-p

 

 

Pb 

±0.35 Vp-p ±2 dB, positive 75 Ω

 

Pr 

±0.35 Vp-p ±2 dB, positive 75 Ω

LKRI-002 

BNC x 2 (Input x 1,Loop-through out x 1)

HD-SDI (4:2:2) input board 

HD-SDI (SMPTE-292M / ITU-R.BT709 / BTA-S004)

 

SDI (SMPTE-259M / ITU-R.BT601)

LKRI-003 

BNC x 4 (Input x 2,Loop-through out x 2)

Dual-link HD-SDI input board  HD-SDI (Single-link, HD-SDI/4:2:2,SMPTE-292M):Y • Pb • Pr, 
 

DC-SDI (Single-link, DC-SDI/4:2:2):Y • Pb • Pr, 

 

Dual-link HD-SDI (Dual-link HD-SDI/4:4:4,SMPTE-372M):RGB, 

 

Dual-link DC-SDI (Dual-link DC-SDI/4:4:4):RGB

LKRI-005 

XGA, Quad-VGA, 1280 x 720 ,SXGA, SXGA+, UXGA, WUXGA, 

DVI Board with HDCP 

1920 x 1080, 2048 x 1080

Others

Safety regulations 

[UL60950 listed], [cUL60950], [FCC Class A], [IC Class A], [VCCI Class A], 

 

[EN60950],[CE Class A], [C-tick], [GB4943], [GB9254], [K60950], 

 [CISPR22], 

[CISPR24]

Supplied accessories 

Remote Commander (1), Size AA (R6) batteries (2), SRX Controller (1), 

 

Ethernet cable (1), M8 screws for lens mounting (4), 

 

Operating Instructions (for SRX-T110/T105) (1), 

 

Operating Instructions (for LKRI-005) (1), Installation Manual (1)

Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/sxrd

DI-0168   (MK10506V1)

© 2008 Sony Electronics Inc. All rights reserved.

Reproduction in whole or in part without permission is prohibited.

Features and specifications are subject to change without notice.

All non-metric weights and measurements are approximate.

Sony and SXRD are trademarks of Sony.

All other trademarks are the property of their respective owners.

Printed in USA (10/08)

SONY54859_SRX-Series   12

SONY54859_SRX-Series   12

11/5/08   11:29:08 AM

11/5/08   11:29:08 AM

Summary of Contents for SRX-T105













Reviews: