background image

5

Thin Liquid Crystal Cell Gap

Another important factor allowing for the high 

contrast of the SRX-T110 and SRX-T105 is the 

SXRD device’s ultra thin cell gap of less than 2 

micrometers.  With conventional ‘vertically aligned 

liquid crystal’ systems, a thin cell gap could not 

be achieved.  Sony has overcome this difficulty 

through the use of innovative planarization 

technology in the silicon backplane structure 

and an advanced silicon wafer-based assembly 

process. 

The SXRD device also adopts a structure that does 

not use “spacers”.  These are columns found in 

conventional reflective liquid crystal devices to 

maintain a constant gap between the liquid cell 

floor and the top of the device.  Spacers tend to 

both scatter and reflect light, which can impair 

high contrast pictures.  In the spacer-less SXRD 

device, these artifacts are no longer seen.

Short Response Time

The thin cell gap structure in SXRD devices also 

contributes to an ultra-fast response time of 2.5 

milliseconds (for both rise and fall).  The SXRD 

device reacts promptly to an instantaneous 

change of picture content, enabling SXRD-based 

projectors to display smoothly.  Consequently, the 

SRX-T110 and SRX-T105 virtually eliminate motion 

blur; a particularly significant benefit for visuals 

that include fast-moving objects.

Reliable Display Device

The SRX-T110 and SRX-T105 use high-power, bright 

lamps.  As a result, special attention has been 

paid to the reliability of the SXRD device.  The 

inorganic materials utilized for the alignment layer 

of the SXRD device are resistant to deterioration 

or deformities that could occur due to the intense 

heat and light generated by the powerful twin 

lamp system.

High-Density Pixel Pitch 8.5 μm

• 4 x Full-HDTV (4096 H x 2160 V pixels)

Thin Cell Gap (2.0 μm) Spacer-less

• Short response time < 2.5 ms (for both rise and fall)
• High Device Contrast ratio 4000 : 1

Light

Inorganic
Alignment Layer

• High reliability

Liquid Crystal

Glass Substrate

Silicon Backplane

Narrow Inter-Pixel
Spacing (0.35 μm)

• High fill factor
• High reflectivity

Aluminium Pad

SXRD Cross-Section Diagram

SONY54859_SRX-Series   5

SONY54859_SRX-Series   5

11/5/08   11:28:58 AM

11/5/08   11:28:58 AM

Summary of Contents for SRX-T105













Reviews: