22
Setting the Projector
Chap
te
r 2
I
n
s
ta
llat
ion
a
nd Conn
ec
tio
n
s
SMTP Authentication:
Selects when “SMTP
Authentication” is necessary when e-mail is sent.
Account Name:
Enter the user name to log in to
the SMTP server.
Password:
Enter the password of the user to log in
to the SMTP server.
Send Test Mail:
Check the check box if you want to send
a test mail.
PC Communication
The PC Communication window is used to configure for
communication between the projector and the computer
for controlling the projector.
Projector Identifying
Configures the projector.
Port No.:
Enter the UDP port number.
Interval:
Select the interval at which the IP packets are
sent.
Select from the drop-down list displayed by
clicking
.
Broadcast Address:
Enter the broadcast address.
:
Registers the entered IP address in the list.
:
Deletes the IP address from the list.
List box:
Displays the registered broadcast addresses.
Controlling PC Destination
Configures the computer for controlling the projector.
Port No.:
Enter the TCP port number.
Time-out:
Select the time when the communication is to
end.
Select from the drop-down list displayed by
clicking
.
Accept connections from these hosts:
Enter the IP
address of a host who is allowed to access the
projector.
:
Registers the entered IP address in the list.
:
Deletes the registered IP address from the list.
List box:
Displays the registered IP addresses of the
hosts allowed to access the projector.
Network Block Reboot
Restarts the Network CPU after the PC Communication
settings complete. Click the “REBOOT” button to restart.
SNMP
The window is used to set up SNMP (Simple Network
Management Protocol).
SNMP
sysName:
Enter the characters for the standard MIB
sysName.
Contact:
Enter the characters for the standard MIB
sysContact.
Location:
Enter the characters for the standard MIB
sysDescr.
Send authentication trap:
Selects when you permit
sending authentication trap.
Accept SNMP packets from any host:
Selects when you
permit access to the projector from any host.
Accept SNMP packets from these hosts:
Selects when
access to the projector is allowed for specified hosts
only. Enter the IP address of the host permitted to
access the projector in the text box.
:
Register the entered IP address in the list.
:
Deletes the registered IP address from the list.
List box:
Displays the registered IP addresses of the
hosts allowed to access.
Community:
Selects and edit the community name.
“Add” button:
Click to add the selected community
name.
“Edit” button:
Click to enter edit mode for attributes
of the selected community.
“Remove” button:
Click to remove the selected
community.
Community Name:
Clicking the “Edit” button displays
the community name whose attributes can be edited,
and the following items are activated:
Rights:
Selects the access right.
“Set to List” button:
Click to apply the change of
attributes.
List box
List box
Summary of Contents for SRX-T105
Page 44: ...Sony Corporation ...
