Wireless Speaker
SRS-XE300
Notes on waterproof and dustproof features
Waterproof and dustproof performance of the speaker
The speaker, with the cap fastened securely, has a waterproof specification of IPX7
*1
as specified in “Degree of
protection against water immersion” of the IEC60529 “Ingress Protection Rating (IP Code)”
*3
, and a dustproof
specification of IP6X
*2
as specified in “Degrees of protection against solid foreign objects”
*3
.
Liquids that the waterproof performance specifications apply to
The waterproof and dustproof performance of the speaker is based on our measurements under the conditions herein
described. Note that malfunctions as a result of water immersion or dust intrusion caused by misuse by the customer are
not covered by the warranty.
To avoid the deterioration of waterproof and dustproof performance
Carefully note the precautions below to ensure proper use of the speaker.
The speaker passes the drop test from 1.22 m (4 ft) on plywood of 5 cm (2 in) thickness conforming to MIL-STD810H
Method 516.8-Shock. However, this does not guarantee no damage, no breakdown, or waterproof and dustproof
performance in all conditions. Deformation or damage from dropping the speaker or subjecting it to mechanical shock
may cause deterioration of the waterproof and dustproof performance.
This speaker does not have a design that is resistant to water pressure. Use of the speaker in a location where high
water pressure is applied, such as in the shower, may cause a malfunction.
Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on the speaker directly.
Also never use the speaker in a place subject to high temperatures, such as in a sauna or near a heat source.
Handle the cap (
) with care. The cap plays a very important role in maintenance of the water resistant and
dustproof performance. When using the speaker, make sure that the cap is closed completely. When closing the cap,
be careful not to allow foreign objects inside. If the cap is not closed completely the water resistant and dustproof
performance may deteriorate and may cause a malfunction of the speaker as a result of water or dust particles
entering the speaker.
Applicable
fresh water, tap water, pool water, salt water
Not
applicable
liquids other than the above (soapy water, water with detergent or bath agents, shampoo, hot spring
water, etc.)
IPX7 equivalency: The speaker has been tested to and maintains its operability when gently submersed in water to a depth of 1 m (3.2 ft) and
left for 30 minutes.
*1
IP6X equivalency: The speaker has been tested to and continues to block dust after stirring for 8 hours in a testing device which contains dust
particles that are up to 75 μm in diameter.
*2
The supplied accessories and the connectors of this speaker (USB) are neither water resistant nor dustproof. To reduce the risk of fires or
electric shocks, do not expose the speaker to water or droplets while using any connectors (USB). Do not place a vase or any other liquid-filled
container on the speaker.
*3
72
