Sony SRS-XB01, Help Manual

Page: 36 / 59

Hint
Some BLUETOOTH mobile phones have handset use priority when receiving a call. In the case of the HFP or HSP connection,
switch the call device to the speaker by operating your BLUETOOTH mobile phone.
If the caller cannot hear or can barely hear your voice, talk more directly into the microphone of the speaker.
The volume of music playback and calling is set independently in the speaker.
Note
Depending on the BLUETOOTH mobile phone, playback may not pause when an incoming call arrives.
Use a BLUETOOTH mobile phone at least 50 cm (1.6 ft) away from the speaker. Noise may result if the speaker and the
BLUETOOTH mobile phone are too close.
If an audio cable is connected to the AUDIO IN jack of the speaker, you cannot listen to music of the BLUETOOTH device.
However, when the BLUETOOTH connection is active, the hands-free function is available.
Depending on the model of your smartphone, the operation system or applications installed, some functions of hands-free calling
may not be used correctly.
Related Topic
Pairing and connecting with BLUETOOTH
®
devices
Terminating the BLUETOOTH connection (After use)
Making a call
If no ring tone is heard via the speaker, the speaker may not be connected with a BLUETOOTH mobile phone with
HFP or HSP. Check the connection status on the BLUETOOTH mobile phone.
Adjust the volume by pressing the –/+ (volume) buttons on the speaker or operating the BLUETOOTH
mobile phone.
When you press the –/+ (volume) buttons on the speaker or adjust the volume on the BLUETOOTH mobile phone,
the power/BLUETOOTH indicator flashes once.
When you set the volume to the maximum (31) or minimum level on the speaker, the power/BLUETOOTH indicator
flashes 3 times.
3
To end a call, press the (play)/ (call) button.
If you were listening to music before the call, playback will resume when the call ends. If you end a call by operating
the BLUETOOTH mobile phone, playback will also resume when the call ends if you were listening to music before
the call.
4
36