Sony SRS-XB01, Help Manual

Page: 14 / 59

Help Guide
Wireless Speaker
SRS-XB01
Pairing and connecting with BLUETOOTH
®
devices
To pair with a second or subsequent BLUETOOTH device, perform the following pairing procedure for each device.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Connect the speaker to an AC outlet via a USB AC adaptor (commercially available), or connect it to a booted
computer. Or, charge the built-in battery sufficiently.
Stop playback on a BLUETOOTH device.
Turn down the volume of the BLUETOOTH device and speaker to avoid any sudden loud sound output from the
speaker. Depending on the BLUETOOTH device, the volume of the device may be synchronized with the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
Turn on the speaker.
The power/BLUETOOTH indicator flashes slowly in blue.
When you turn on the speaker for the first time after purchase, the power/BLUETOOTH indicator will begin to
flash quickly, and the speaker enters pairing mode automatically by just pressing the
(power)/ PAIRING
button. Proceed to step .
When you turn on the speaker, the speaker tries to make a BLUETOOTH connection with the last connected
BLUETOOTH device. If the device is nearby and its BLUETOOTH function is on, the BLUETOOTH connection
is established automatically and the power/BLUETOOTH indicator stays lit. In this case, turn off the
BLUETOOTH function or turn off the power of the currently connected BLUETOOTH device.
1
Press and hold the (power)/ PAIRING button until you hear beeps and the power/BLUETOOTH
indicator begins to flash quickly in blue.
The speaker enters pairing mode.
2
14