13
Control Panel
Cha
p
te
r 2
Name
s
an
d F
unc
tions
of
P
a
rts
A
SRMemory slot section
a
Eject button
Ejects a card.
b
SRMemory indicator
Indicates the status of the SRMemory card inserted in the
slot.
Off:
The SRMemory card is logically detached from the
unit.
Blue:
An SRMemory card is connected to the unit and
available for use.
Red:
Data is being recorded to the SRMemory card. Or,
files are being copied from another SRMemory card.
Changes to this state when receiving data from the
FTP.
Green:
Data is being read from the SRMemory card. Or,
data is being read while copying files to another
SRMemory card. Changes to this state when sending
data to the FTP.
Amber:
Data is simultaneously being recorded to and read
from the SRMemory card.
Flashing blue light
1)
:
The SRMemory card is logically
being attached to or detached from the unit.
Flashing green light
1)
:
Data other than audio and video
signals, such as file name changes, OK/NG/KEEP
flag settings, write protection settings for files, is
being written.
Flashing purple light
1)
:
Files are being deleted or
formatting is being performed from the maintenance
menu.
Flashing red light
1)
:
Salvaging or formatting is being
performed in response to an error.
Fast flashing red light
1)
:
A problem was detected while
processing the SRMemory card. Eject or salvage the
card or perform the appropriate operation as
instructed by the message that appears on the control
panel.
1)
Flashing LED:
Flashes at 1-second interval.
Fast flashing LED:
Flashes at 1/4-second interval.
For details on salvage operations and formatting when
problems have occurred, see “Troubleshooting” in the
Appendix (page 71).
c
SRMemory slot
Insert an SRMemory card.
d
On/Standby button and indicator
Switches the unit between on and standby when the main
power switch on the connector panel is turned on.
The indicator is lit red in the standby state, and green in the
on state. It is off when the main power switch is off.
e
PHONES (headphones) jack
Accepts stereo headphones for monitoring audio during
recording and playback.
f
LEVEL (volume) knob
Adjusts the output level of the PHONES jack.
g
USB connectors
Currently cannot be used.
