Sony SRP-DC5, Operating Instructions Manual

Page: 3 / 8

On safety
•
Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by qualified
personnel before operating it any further.
•
Unplug the unit from the wall outlet if it is not to be
used for an extended period of time. To disconnect the
cord, pull it out by grasping the plug. Never pull the
cord itself.
On installation
•
Do not install the unit in a location near heat sources
such as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical vibration or
shock.
On operation
•
Before making program source connections, be sure to
turn the power switch off and unplug the unit.
•
When the unit is not used, turn the power off to
conserve energy and to extend the useful life of your
unit.
On cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
On repacking
Do not throw away the carton and the packing material. It
makes an ideal container to transport the unit in.
When shipping the unit for repair work or to another
location, repack it as it was.
On operating voltage
This model is operable from both line voltages of 120 V
and 230 V and is internally switched automatically to meet
the line voltage whichever is available.
In a 120 V AC zone, use the supplied plug adaptor with
the power cord. If a plug of any other kind is required,
please consult your nearest Sony dealer.
If you have any questions or problems concerning your
unit, please contact your nearest Sony dealer.
Precautions
Notice for the Customers in the United King-
dom
IMPORTANT
The wires in this mains lead are coloured in accordance
with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter
L or coloured red.
Do not connect either wire to the earth terminal in the
plug which is marked by the letter E or by the safety earth
symbol
Y or coloured green or green-and-yellow.
Warning/Precautions