Connection
Notes
Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
power adaptor.
Polarity of the plug
You have to set the video format of the signal to be
output from the camera. For detailed information on
how to set the video format, see “
SYSTEM
SELECT switch” on page 8.
Do not make VISCA RS-232 and RS-422 connections
at the same time, as this may cause malfunctions.
1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on how to connect using VISCA RS-422, see page 56.
3) For details on the VISCA over IP connection using LAN cable, see page 29.
to 12V
Power cord (supplied)
HDMI cable (not supplied)
to HDMI VIDEO
to HDMI input
VISCA cable (not supplied)
1)
to VISCA RS-232 IN
to RS-232
to VISCA RS-232 OUT To VISCA IN of other
SRG series (when
connecting to more
than one camera)
to VISCA RS-422
2)
AC power adaptor (supplied)
to AC outlet
Computer with LAN or
serial communication
interface, HD video
monitor with HDMI
input interface, etc.
to LAN
to LAN
LAN cable (not supplied)
