Op
er
at
ing t
he Camer
a
Vi
a
a
Ne
tw
or
k
15
Operating the Camera
Other panel
Connection
Select the transmission mode of the video/audio data
from
TCP
,
Unicast
, and
Multicast
. For details, see
“Switching Transmission Mode” on page 18.
Deactivation of hardware acceleration
Check the checkbox if there are problems in video
playback.
Note
The settings of the following items are saved
automatically.
The camera may not operate properly depending on the
environment and saving condition of the settings.
Screen mode, View size, Frame rate, Volume, Audio
output levels, Operation using the images on the camera
control panel, Connection, and Deactivation of
hardware acceleration
In this case, return to the initial setting by deleting the
file below.
For example: the main drive is C
C:\Users\<User name>\AppData\Roaming\Sony\
SNCActiveXViewer\SNCActiveXViewer_configuratio
n.ini
Plug-in free viewer control bar
Live viewer using Plug-in free viewer
Display sample:
Control bar
The following operation buttons are available.
Setting
You can set the image size, frame rate, PTZ operation
mode and image codec.
Streaming start button
Starts streaming. (Appears while stops streaming.)
Streaming stop button
Stops streaming. (Appears while streaming.)
Preset
Select a preset position to move the camera to the
registered preset position.
(Displayed only when a camera preset position is
registered.)
Save still image button
Captures still images taken by the camera and saves
them to the computer.
Note
No audio is output if the Plug-in free viewer is used.
Monitor screen
Control bar
