Sony SPP-S2430 - Cordless Telephone Page 53 Operating Instructions Manual Download

Page: 53 / 80

Telephone Features

Telephone Features

Transferring a call

You can transfer a call between the cordless handset and base phone
without disconnecting the call.

To transfer from the base phone to the
cordless handset

Press

(INTERCOM)

to page the

cordless handset.

The call is put on hold on the
base phone and the cordless
handset rings.
“

PAGING

” appears on

the display of both the base
phone and cordless handset.

Pick up the cordless handset
from the charger (When Quick
talk is set to “USE”; see page 36)
or press

(TALK)

(INTERCOM)

on the cordless handset.

“INTERCOM” appears on the
display of both the cordless
handset and base phone.

You can talk between the base
phone and the cordless handset.

To talk to the caller with the
cordless handset, replace the
handset in the cradle or press

(SPEAKERPHONE)

on the base

phone.

“TALK” appears on the display
of the cordless handset.

If no one answers the phone

Press

(INTERCOM)

again.

Tips

• You can receive an intercom call on the cordless handset even when the

RING switch is set to OFF. The cordless handset will ring at a low level.

• If you have accidentally pressed

(HOLD)

in step 1, just press

(INTERCOM)

and you will get the same result as by pressing

(INTERCOM)

only.

continued

(SPEAKERPHONE)

(TALK)

Summary of Contents for SPP-S2430 - Cordless Telephone

















































































Search results

Summary of Contents for SPP-S2430 - Cordless Telephone

Reviews:

Related manuals for SPP-S2430 - Cordless Telephone

Brands by name

Popular brands

Sony SPP-S2430 - Cordless Telephone, Operating Instructions Manual

Search results

Summary of Contents for SPP-S2430 - Cordless Telephone

Reviews:

Related manuals for SPP-S2430 - Cordless Telephone

Brands by name

Popular brands