Sony SPP-S2430 - Cordless Telephone Page 52 Operating Instructions Manual Download

Page: 52 / 80

Telephone Features

To talk from the base
phone to the cordless
handset

Press

(INTERCOM)

The base phone and cordless handset
ring and “

PAGING

” appears

on the display.

When a person at the cordless handset
picks up the cordless handset from the
charger (When Quick talk is set to
“USE”; see page 36) or presses

(TALK)

(INTERCOM)

, you can talk with

each other.

“INTERCOM” appears on the display.

When you are done talking

Replace the handset in the cradle or
press

(SPEAKERPHONE)

on the base

phone.

If no one answers the phone

Press

(INTERCOM)

again.

Notes

• If there is an incoming call during intercom conversation, intercom call will

be disconnected, and both the base phone and the cordless handset will ring.

• While talking with an outside caller via the base phone or cordless handset,

you cannot make an intercom call. If you press

(INTERCOM)

on the cordless

handset, “BASEPHONE IN USE” appears on the display and you will hear
a busy tone.

Tip

You can receive an intercom call on the base phone or the cordless handset even
when “RINGER VOL” on the base phone is set to “OFF”, or the RING switch
on the cordless handset is set to OFF. The phone will ring at a low level.

Talking between the phones (Intercom) (continued)

(SPEAKERPHONE)

Summary of Contents for SPP-S2430 - Cordless Telephone

















































































Search results

Summary of Contents for SPP-S2430 - Cordless Telephone

Reviews:

Related manuals for SPP-S2430 - Cordless Telephone

Brands by name

Popular brands

Sony SPP-S2430 - Cordless Telephone, Operating Instructions Manual

Search results

Summary of Contents for SPP-S2430 - Cordless Telephone

Reviews:

Related manuals for SPP-S2430 - Cordless Telephone

Brands by name

Popular brands