Sony SO-02J, Instruction Manual

Page: 120 / 256

118
Apps
Please note the following when holding the
terminal over an IC card reader or NFC
module equipped device.
･ Bring mark close to the device slowly
without hitting it strongly.
･
Hold mark over the center of the device
and parallel to it. If scanning fails even with it
held in front of the center of the scanner,
slightly lift up the terminal, or move it
backwards/forwards or to the left/right.
･
If there is any metal object between mark
and the other device, scanning may fail.
Putting the terminal into a case or cover may
affect communication. In that case, remove
the case or cover.
1
From the Home screen,
u
[Osaifu-Keitai].
2
Select a service you want to use
from a service list.
･
Download an application compatible
with service site or service.
3
Hold mark over an IC card
reader.
❖
Information
･ You can scan and write data to or from an IC card
reader without activating Osaifu-Keitai compatible
application.
･ These services are available even when the terminal
is off. However, they may not be available if the
terminal has been off for a long time or the battery is
too low.
･ Depending on your installed Osaifu-Keitai
compatible application or its settings, your terminal
may not respond when you hover it over an IC card
reader, if the screen is locked or if the backlight or
terminal is off.
･ You can use Osaifu-Keitai compatible service even
when the PIN code for docomo nano UIM card
cannot be unlocked or PIN locked.
･ Note that when you do not subscribe sp-mode,
some functions of Osaifu-Keitai compatible service
may not be available.
Notes on holding over the
device
mark
Using "Osaifu-Keitai
compatible service"