Sony SLV-SX40EG Operating Instructions Manual Download Page 51

Page: 51 / 60

Additional Information

Symptom

The picture is no colour.

The picture rolls vertically
during picture search.

The picture has no sound.

No TV programme appears on
the TV screen.

TV reception is poor.

The tape starts playing as soon
as it is inserted.

The tape is ejected when you
press

REC.

Nothing happens when you
press

REC.

The timer does not operate.

Remedy

• The COLOUR SYSTEM option in the OPTIONS-1

menu is set to the wrong position. Set the option to
conform to the system that the tape was recorded.

• Adjust the vertical hold control on the TV or monitor.

• The tape is defective.

• Make sure the TV is set to the video channel. If you

are using a monitor, set it to video input.

• If the VCR is connected to the TV using only the aerial

cable, make sure that RF MODULATOR in the
OPTIONS-2 menu is set to ON.

• Select the correct source with the INPUT SELECT

button. Select a programme position when recording
TV programmes; select “L1” when recording from
other equipment.

• Adjust the TV aerial.
• Make sure the TV system is correctly set for your TV.
• Make sure SYSTEM (B/G or D/K) in the TUNER

menu is set to the same system in your local area.

• The safety tab has been removed. To record on this

tape, cover the tab hole.

• Check that the safety tab has not been removed.

• Make sure the tape is not at its end.

• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer

recording.

• Make sure your timer settings have not already passed

the current time.

• The clock stops if the VCR is disconnected from the

mains for more than one hour. Reset the clock and
timer.

Timer r

ecor

ding

Recor

ding

Playback

continued

Summary of Contents for SLV-SX40EG





























































Search results

Summary of Contents for SLV-SX40EG

Reviews:

Related manuals for SLV-SX40EG

Brands by name

Popular brands

Sony SLV-SX40EG, Operating Instructions Manual

Search results

Summary of Contents for SLV-SX40EG

Reviews:

Related manuals for SLV-SX40EG

Brands by name

Popular brands