background image

ENGLISH

1

Safety instructions

This video recorder is intended for the reception,
recording and playback of picture and sound
signals. Every other use is explicitely excluded.

Danger - high voltage in this appliance!
Do not open! The video recorder does not contain
any parts that can be repaired by the user. As long
as the video recorder is connected to the mains,
there are parts of it still in operation. To switch off
the video recorder completely you must disconnect
it from the mains.

Please note that this video recorder is intended for
a mains voltage of 220 - 240V~, /50Hz.

The manufacturer cannot be held responsible for
any damage which is incurred by not using the
video recorder in compliance with the national 
guarantee conditions or safety instructions.

Ensure that no objects or liquids enter the device.
If a liquid enters, pull out the power plug of the
video recorder immediately and consult customer
services.

Dear customer,
with this video recorder (VCR), you own one of the
most sophisticated yet simple-to-use video recor-
ders on the market.
Naturally, you can't wait to use your new video
recorder, but before you start, it's worthwhile
taking the time to read through this operating
manual. Acquainting yourself with the video 
recorder features is the best way to guarantee
trouble-free operation.

This video recorder is supplied with additional

abridged operating instructions

which are to be

found in its packaging.

If you should nevertheless get difficulties in 
operating this video recorder, please contact a

consumer help desk

responsible for your country.

You will find the telephone numbers in the guaran-
tee information supplied.

Contents

Page

0

1. BUTTONS, CONTROLS AND

2

SOCKETS

The remote control at a glance

2

The back of the video recorder

3

The front of the video recorder

3

0

2. INSTALLATION. HOW DO I  

5

INSTALL THE VIDEO RECORDER ?

Connecting the video recorder

5

Inserting the batteries into the remote control

6

Connecting to the aerial

6

Connecting to the TV set

7

Connecting to the mains supply

7

Some notes on operation

7

Saving energy

8

Further connecting possibilities

8

Emergency interrupt

8

OSD – the on-screen user's guide

9

0

3. STORING TV CHANNELS

10

The "Easy Link" function

10

Autostore (Automatic channel search)

10

Assigning TV channels automatically (Follow TV) 11
Assigning TV channels manually

12

Manual search

13

0

4. PLAYING A RECORDED CASSETTE

14

S-VHS Playback

14

The JOG/SHUTTLE functions

15

0

5. HOW CAN I RECORD DIRECTLY ?

18

Direct recording

19

0

6. HOW DO I PROGRAMME A

20

RECORDING ?

Programming with VIDEO plus+

21

Programming with TXT pages

22

Normal TIMER programming

23

Recording from a satellite receiver

24

Checking, correcting and clearing

25

a TIMER block

0

7. EDITING VIDEO RECORDINGS 

27

Audio dubbing

27

The Insert functions

29

Synchro-edit

30

Insert-edit functions

33

Programme-edit functions

35

0

8. ADDITIONAL FUNCTIONS

37

OF THE RECORDER

Personal preferences

37

Checking/setting time and date on the 

37

video recorder
Special settings for the video recorder 

38

and the TV set

0

9. NOTES

45

10. BEFORE YOU CALL A TECHNICIAN

46

11. TECHNICAL DATA, ACCESSORIES

47

OPERATING MANUAL VR 969/05

Summary of Contents for VR 969

















































Reviews: