Sony SLV-SX40EG Operating Instructions Manual Download Page 52

Page: 52 / 60

Additional Information

Symptom

A tape cannot be inserted.

The remote commander does
not function.

The tracking meter does not
appear on the TV screen.

The VCR needs to be cleaned.

Others

Remedy

• Check that a tape isn’t already in the tape

compartment.

• Make sure you are pointing the remote commander at

the remote sensor on the VCR.

• Replace all the batteries in the remote commander with

new ones if they are weak.

• Make sure the TV / VIDEO remote control switch is

set correctly.

• The recording condition of the tape is very poor and

tracking cannot be adjusted.

• The tracking meter does not appear when playing back

an NTSC-recorded tape.

• Clean the cabinet, panel and controls with a dry, soft

cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.

Troubleshooting (continued)

Summary of Contents for SLV-SX40EG





























































Search results

Summary of Contents for SLV-SX40EG

Reviews:

Related manuals for SLV-SX40EG

Brands by name

Popular brands

Sony SLV-SX40EG, Operating Instructions Manual

Search results

Summary of Contents for SLV-SX40EG

Reviews:

Related manuals for SLV-SX40EG

Brands by name

Popular brands