44
Playing a tape
filename[01GB05BAS-NP0.fm] model name1[SLV-SE850G(ENG)] model name2[]
[3-062-332-11 (1)]
Additional tasks
To play an NTSC-recorded tape
Set NTSC PB at the rear of the VCR according to the colour system of your TV.
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to “0:00:00.” Search for the point afterwards by referring to
the counter.
To display the counter on the TV screen, press
DISPLAY.
Notes
• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
• Depending on your TV, the following may occur while playing an NTSC-recorded tape:
– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
• If you playback a tape in LP or EP mode with the NTSC system, the sound is heard in
monaural.
• While setting the menu on the TV screen, you cannot use
M
/
m
/</,
buttons for tape
operation.
3
Press
H
PLAY.
When the tape reaches the end, it will rewind automatically.
To
Press
Stop play
x
STOP
Pause play
X
PAUSE
Resume play after pause
X
PAUSE or
H
PLAY
Fast-forward the tape
M
FF during stop
Rewind the tape
m
REW during stop
Eject the tape
Z
EJECT
When your TV is
Set NTSC PB to
PAL only
ON PAL TV
PAL and NTSC
NTSC 4.43
OK
PLAY
TV
STEREO
AUTO SET UP
LP
EP
SP
VIDEO
EDIT
NICAM
VPS
PDC
OPC
H
M
S
