G
e
tti
n
g
Star
ted
33
Presetting channels
filename[01GB04GET-NP0.fm] model name1[SLV-SE850G(ENG)] model name2[]
[3-062-332-11 (1)]
Disabling unwanted programme positions
After tuning the TV channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/– buttons.
You can also disable unwanted programme positions using the CHANNEL LIST
menu (see page 36).
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels
clearly. If, the picture is not clear, you may also use the manual tuning function.
Tip
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don’t proceed for more than a few minutes.
1
In step 5 above, press programme number button “0” twice to display the number
“00” beside CHANNEL SET.
2
Press OK to confirm the setting, then MENU to exit the menu.
1
Press PROG +/– or the programme number buttons to select the programme
position for which you cannot obtain a clear picture.
2
Press MENU, then select SETTINGS and press OK.
3
Select TUNER, then press OK.
4
Select FINE TUNING.
The fine tuning meter appears.
5
Press
<
/
,
to get a clearer picture, then press MENU to exit the menu.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
SET
:
MENU
EXIT
:
TUNER
C 2 7
PROG.
CHANNEL SET
AFT
FINE TUNING
RETURN
4
TUV
Selected programme
position
