Sony SLV-SE610G Operating Instructions Manual Download Page 78

Page: 78 / 92

Changing menu options

Master Page : Left

filename[010addo.fm] model name1[SLV-SE610G] model name2[SLV-SE710G]

model name3[SLV-SE710I] model name6[SLV-SE810G]

[3-065-677-11 (1)]

Notes

• When the VCR stands by for recording, the indicators in the display window

remain lit even when POWER SAVE is set to FULL, PARTIAL, or ON.

• With the EDIT option ON, the OPC function does not work.
*

not available on SLV-SE610G

SLV-SE710G, SE710I, and SE810G only

SLV-SE610G only

•

NORMAL

for normal everyday use.

• HIGH for well-used video tapes such as rented tapes.

Select this option when NORMAL does not improve the
picture quality.

• OFF to switch off the RR function.

Menu option

Set this option to

Summary of Contents for SLV-SE610G





























































































Search results

Summary of Contents for SLV-SE610G

Reviews:

Related manuals for SLV-SE610G

Brands by name

Popular brands

Sony SLV-SE610G, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE610G

Reviews:

Related manuals for SLV-SE610G

Brands by name

Popular brands