Sony SLV-SE610G Operating Instructions Manual Download Page 45

Page: 45 / 92

Recording TV programmes using the Dial Timer (SLV-SE810G only)

sic
O
p

er
ati
ons

Master Page : Right

filename[010bas.fm] model name1[SLV-SE610G] model name2[SLV-SE710G]

model name3[SLV-SE710I] model name6[SLV-SE810G]

[3-065-677-11(1)]

To return to the previous step

To return to the previous step, press the P and – buttons on the
VCR at the same time during any of the Dial Timer settings.

To stop recording

To stop the VCR while recording, press

STOP.

To use the VCR after setting the timer

To use the VCR before a recording begins, just press

. The

indicator

turns off and the VCR switches on. Remember to press

to reset the VCR

to recording standby after using the VCR.

You can also do the following tasks while the VCR is recording:

• Reset the counter (page 38).
• Display tape information on the TV screen (page 40).
• Check the timer settings (page 61).
• Watch another TV programme (page 41).

Press

DIAL

TIMER.

The programme position or station name appears in the display
window.

Turn

DIAL TIMER to set the programme position.

To record from another source connected to one or more of the
LINE inputs, turn

DIAL TIMER or press INPUT SELECT to

display the connected line in the display window.

Press

DIAL TIMER to complete the setting.

“OK” appears in the display window for about five seconds.

The

indicator appears in the display window and the VCR stands

by for recording.

To record from another source, leave the connected equipment
switched on.

DIAL TIMER

OPC

VIDEO

DIAL TIMER

INPUT SELECT

OPC

VIDEO

DIAL TIMER

continued

Summary of Contents for SLV-SE610G





























































































Search results

Summary of Contents for SLV-SE610G

Reviews:

Related manuals for SLV-SE610G

Brands by name

Popular brands

Sony SLV-SE610G, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE610G

Reviews:

Related manuals for SLV-SE610G

Brands by name

Popular brands