Sony SLV-M10HF - Video Cassette Recorder Operating Instructions Manual Download

Page: 43 / 120

Getting Started

Getting Started

If you cannot get your VCR to control the cable box/DSS receiver

• Check that the Cable Mouse is connected to the CABLE BOX CONTROL

jack on the VCR.

• Check the position of the Cable Mouse.
• Place the cable box/DSS receiver and VCR away from each other. Do not

place the cable box/DSS receiver on top of the VCR.

• Try the setup again making sure to use the correct control code. If the

cable box still does not respond, try the other codes that are listed.

If your cable box still does not operate with the Cable Mouse, contact your
cable company to see if they can provide you with a compatible cable box.

Note

• Make sure you turn off the VCR when you plug in or unplug the Cable Mouse. If

you unplug the Cable Mouse and plug it in again, turn on the VCR before you use
the cable box/DSS receiver control feature.

Summary of Contents for SLV-M10HF - Video Cassette Recorder

























































































































Search results

Summary of Contents for SLV-M10HF - Video Cassette Recorder

Reviews:

Related manuals for SLV-M10HF - Video Cassette Recorder

Brands by name

Popular brands

Sony SLV-M10HF - Video Cassette Recorder, Operating Instructions Manual

Search results

Summary of Contents for SLV-M10HF - Video Cassette Recorder

Reviews:

Related manuals for SLV-M10HF - Video Cassette Recorder

Brands by name

Popular brands